Beantwortet

Apple Watch start button not working

Hi, just bought an Apple watch s2 and put strava on but cannot get the start button to work. pressing it doesnt do anything, holding down doesnt do anything. i just cant get past the start button screen! HELP

 

14

Kommentare

88 Kommentare
  • Offizieller Kommentar

    In your iPhone, go to Settings > Privacy > Motion & Fitness and make sure that Strava is turned on (green). You may have to uninstall and reinstall the app beforehand.

    Also, while in the Privacy section of your Settings, make sure Location services and Health is enabled. 

    This should resolve the issue, but if it does not, please select Submit a Request in the footer of this page to contact us directly.

    Aktionen für Kommentare Permalink
  • I have the exact same problem! its so annoying! the update sucks. It also doesn't give me KM notifications anymore! I hate the update. I have Apple Watch 1. Im really disappointed :( it was working great before the update!

    9
    Aktionen für Kommentare Permalink
  • None of the suggestions above seem to work for me. Anyone else experiencing this issue?

    I've uninstalled/reinstalled the Strava app several times, taken it on/off my watch, and have all of the Motion & Fitness prompts that Shelby mentioned above enabled. But, when I tap or hold the start button, I get nothing, and I can swipe through the rest of the app on the watch just fine.

    7
    Aktionen für Kommentare Permalink
  • Here what I did to make work on my AW2+iPhone7

    1. before uninstalling App from iPhone make a logout on the app
    2. uninstall the app
    3. reinstall the app
    4. verify that the app is installed on AppleWatch2
    5. open the app on iPhone, perform login and agree to all security questions (I noticed there may be multiple at the same time, but noproblem)
    6. verify on iPhone's Settings > Privacy > Motion & Fitness that Strava is present and enabled
    7. start a run on iPhone, it will ask the permission for geolocation, agree on that, stop the run
    8. now you should be able to start a run also on AppleWatch

    The problem I think comes from a simple update from previous version of Strava on iPhone/AW2, it did not asked the permissions to get motion&Fitness and location.

    STRAVA please do something, is not really user friendly aproach.

    Thank You a (non-premium) user

    4
    Aktionen für Kommentare Permalink
  • I have had this problem on and off, too. I ran a 5-mile race two days ago, and my Watch missed recording the first half-mile before I figured it out. I think that what I was doing was a Force Touch on the Start button instead of a regular Tap.

    When you're at a he start of an event, like a running or cycling race, you're pumped up with adrenaline, and it's really hard to control whether you're doing a Tap or a Force Touch.

    Since the Force Touch on the Start button appears to do nothing anyway, I think Strava should modify the Watch App so that when you're looking at the Start button, both a Tap and a Force Touch do the same thing, i.e. actually START the session.

    3
    Aktionen für Kommentare Permalink
  • Thanks Shelby.  Worked perfectly.  Thanks

     

    2
    Aktionen für Kommentare Permalink
  • I have the same problem on my aw2

    2
    Aktionen für Kommentare Permalink
  • My set up checklist will not let me finish because the motion & fitness does not respond, it is on in settings but remains onseen. 🙁

    2
    Aktionen für Kommentare Permalink
  • Cannot connect Apple Wat h. Tried everything mentioned

    2
    Aktionen für Kommentare Permalink
  • For some reason, the app in my Apple Watch won't run. I open it in my watch, which prompts me to open the app in my iPhone. I open the the app in my iPhone and tap on "getting started". It gives me a check list: of five items. I click on 4 of them and turn on the requirements. One of them: Motion and Fitness, when I click on this, it takes me to a different page, I turn on everything there but still doesn't allow me to click on "finish", therefore, I can't use the app in my Apple Watch.

    2
    Aktionen für Kommentare Permalink
  • SOLUTION!

    I think I have the solution. I had the same problem, start button not working and motion fitness not showing Strava. I tried uninstalling and all sorts of things and finally, after an hour... this works.

    1)Delete the iPhone app and reinstall (unsure if this is needed but do it to be sure).

    2) Uninstall the app from your watch. Otherwise it won't update properly.

    3) Setup the watch device on your phone. This was buggy and I found this took a couple of shots. Firstly I ticked the 4 options, then set motion&fitness on. The app then restarted and wouldn't let me finish! I then went back to iPhone settings and switched off Strava from motion&fitness. I went back to the Strava app, setup the watch again, this time after switching on motion&fitness, the finish box turned orange and announced that the watch was ready. Done!

    4) Reinstall the watch app and it should work. If you try to setup on the phone whilst the app is still on your watch it seems to keep some older version of the watch app and not update fully.

    This is all a bit buggy and not slick. When you spend a fortune on a phone and a watch you expect it to run smoother. Strava is a brilliant app, all the better when it works consistently and you feel you can trust it to work.

    Hope this works for other people.

    2
    Aktionen für Kommentare Permalink
  • Has any 'help' been offered on this issue? I have the same problem on both the run and ride options :-(

    I'd really like to be able to utilise the Strava app on my Apple watch S2, but if the app doesn't respond and therefore doesn't actually 'start' a session, it makes life fairly difficult.

    1
    Aktionen für Kommentare Permalink
  • Same here... Have re-installed on both my phone and the watch. The phone app gets GPS, so it works, but the watch app just sits there when I press the big orange button. 

    What a mess!

    1
    Aktionen für Kommentare Permalink
  • None of the suggestions above seem to work for me too...

    frustrating experience...

    1
    Aktionen für Kommentare Permalink
  • Same problem here!. I went to Settings > Privacy > Motion & Fitness and make sure that Strava is turned on (green).

    Also checked the location services and Health is enabled, and still not working the App on my apple watch.

    Any solution?

    1
    Aktionen für Kommentare Permalink
  • Same issue here. However I reinstalled the app and now Strava was not showing in Settings > Privacy > Motion & Fitness. Only Health and Waze were there. 

    I went into the Watch app and installed Strava on the watch and Strava is now showing in Settings > Privacy > Motion & Fitness and the START button is now working.

     

    Thanks @Shelby

    1
    Aktionen für Kommentare Permalink
  • Me too. I have an AW2

    Same issue - no Strava in Settings > Privacy > Motion & Fitness : Enable Stava -

    I have tried all the things mentioned above. I uninstalled and reinstalled apps on both iPhone and AW2. No change.

    I appreciate new software has bugs, but this is really frustrating.

    What do I do?

    1
    Aktionen für Kommentare Permalink
  • I've tried everything above, reinstalled the app twice, and this is still not working...

    Every time I change the motion and fitness setting while using the app, it makes it crash both on my phone and on my watch, I mean seriously Strava it's 2017 I expected more from you.

    This really needs to be fixed, it's been more than a month now that I cannot use the app. It's really making me reconsider renewing my premium subscription if a tiny bug like that can take so much time to get fixed while all the same rendering the app completely useless.

    1
    Aktionen für Kommentare Permalink
  • Right. I followed all the steps above and nothing worked. Button still wouldn't activate a run. So bored with it all I went for my run, a 100meters in I tried the button and it worked, now it works fine everytime. Might have just been coincidence but try it incase it works for you.

    1
    Aktionen für Kommentare Permalink
  • I've tried the above, but the strava start button won't respond on my apple watch. This issue started today for the first time. It worked fine a week ago. I have the first apple watch model and use an iphone 6s. Any suggestions would be great!

    1
    Aktionen für Kommentare Permalink
  • Latest app update seems to have fixed it! Now there is the option of selecting Indoor Run / Outdoor Run / Walk etc instead of the big Start button it seems to respond well.

    1
    Aktionen für Kommentare Permalink
  • My wife has the same issue with her iwatch - when she presses start nothing happens. Stangely mine works perfectly...

    0
    Aktionen für Kommentare Permalink
  • So, this morning i unistalled the Strava app from the watch S2, and iPhone. 

    Restarted the watch entirely, and then re-installed Strava from the app store on the phone.

    I then opened Strava from my phone, and then opened it on the watch too. After following the instructions on screen (for both watch "dismiss" and iPhone "accept location tracking" etc), it seems to allow recording of activity! 

    I haven't tested this out entirely yet - will do so tonight and see.

    0
    Aktionen für Kommentare Permalink
  • I have the same issue, it worked fine yesterday but today it will not work, any idea how to solve this issue?

    0
    Aktionen für Kommentare Permalink
  • I have tried to uninstall and reinstall it doesn't work, it worked fine yesterday, but not today and I haven't touched/changed anything

    0
    Aktionen für Kommentare Permalink
  • I have the same issue! I verified all setting and permissions and everything was good. It even works on my phone so I don't understand why it doesn't work on my Apple Watch Serie 2. I'm very disappointed because after resetting my watch it is still not working. We need a update soon

    0
    Aktionen für Kommentare Permalink
  • Ok... I tried the updated fix and it didn't work... until I un- and re-installed the Strava app. (until I did that, Strava didn't show up in the Motion & Fitness list.)

    0
    Aktionen für Kommentare Permalink
  • The app is still not working- I have submitted a request 

    0
    Aktionen für Kommentare Permalink
  • I had to actually uninstall the app from my iPhone and reinstall it and then when I got ready to start a run on my Apple Watch 2, the prompt to allow Motion & Fitness appeared.

    0
    Aktionen für Kommentare Permalink
  • I've had to unpair my watch then repair, seems fine, will find out tomorrow in my run

    0
    Aktionen für Kommentare Permalink

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.

Sie haben nicht gefunden, wonach Sie suchten?

Neuer Post