已回答

Import GPX files as a Strava Route

Lots of routes built on the sites, would like to import to route builder section and not recreate them all.

550

评论

188 条评论
  • 正式评论

    Please see our article for instructions on how to use the Strava Labs tool to upload a GPX file as a Strava Route. 

    At some future time, we are interested in incorporating this feature into the Strava site. In the meantime, our apologies if you receive an error message when trying to create the Route. It is mostly likely because Strava Routes is still in beta, and there is missing street and trail data that doesn't match the imported GPX. 

    Thanks! 

    评论操作 固定链接
  • Yes please, this is a function I would like also.

     

    8
    评论操作 固定链接
  • Lets celebrate 2 years of 'Error computing route'

    7
    评论操作 固定链接
  • How about the ability to convert an activity into a route?

    6
    评论操作 固定链接
  • Pleaseeee!!!  I think this is a MUST!

    5
    评论操作 固定链接
  • Was pretty shocked that neither importing or converting was supported. If Routes are going to be in any way useful then surely this needs to happen? I imagine these will get added to club/race pages in the future (or I hope so...) so please add this.

    Or at least comment?

    5
    评论操作 固定链接
  • Yes, definitely this feature is well needed.

    5
    评论操作 固定链接
  • I have tried to convert several GPX files and every time the lab page says "Error computing route". I know the files are fine. They are furnished by large races and work on other sites (e.g. MapMyRide). 

    4
    评论操作 固定链接
  • I created route in gpsies.com and tried upload to gpx-to-route. But I have "Error computing route.". This GPX file loaded successfully to OsmAnd, but it does not load to strava.

    3
    评论操作 固定链接
  • Hi,

    I also get the "Error computing route." message when trying to upload routes. I suspect it is a time stamp issue.

    If anybody from Strava can investigate, a link to the file below.

    https://www.dropbox.com/s/s4477hzjrs13fk7/Cyclingpeak-district-2016-day-1-longer.gpx?dl=0 

    Cheers

    Ian

    3
    评论操作 固定链接
  • Since we've just got the feature to turn activity into a route... and you could just upload a gpx as an activity and turn it into a route...

    Surely it can't be too much to add this?

     

     

    But then again people have been asking for lock screen integration *forever*.

    2
    评论操作 固定链接
  • This would be very useful, especially when events release their routes in GPX format.

    2
    评论操作 固定链接
  • The "work around" above doesn't work well as when you get .gpx files for an event, they generally do not contain time information, only the gps co-ordinates. You then get the error "time information missing from file" when trying to load them as an activity. I'll be using mapmyrun till Strava gets their act together!

    2
    评论操作 固定链接
  • After the upload, the sytem automaticaly try to make some correction and change the road. If I choose Manual after the upload it's too late, the route is not exactly the same as the gpx. 

    Can I disable this correction? 

    2
    评论操作 固定链接
  • Hi Elle, when I use either a fellow Strava member's activity via Copying & Pasting the URL or the GPX file downloaded from his activity, and then I upload it using the link you provided, I just get a "Error Computing Route: Reset" message.  It appears as though most of the route populates, so it would be great to still save it despite whatever errors there are, but then again it would also be great to have zero errors calculating a route from one of Strava's own activities.  Any thoughts?

    The activity is:

    https://www.strava.com/activities/556923462

    2
    评论操作 固定链接
  • Hi,

    I try to import a GPX road or track (route) from http://www.openrunner.com/index.php?id=5740018 and Strava give an error "Error computing route"

    Do you know why?

    Best Regards

    2
    评论操作 固定链接
  • I was going to ask why this isn't built in but looks like others already have,  fingers crossed

    1
    评论操作 固定链接
  • Looks like this should be an essential feature for the next release,surely can't be that hard to do.

    1
    评论操作 固定链接
  • Hi Aiden,

    It is true, Strava does not accept files for upload that lack time data. I'm not sure if this will ever get changed, but (hopefully) we'll allow folks to upload files without time data to our Route Builder. 

    In the meantime, the workaround you suggest should work. Also the site GPSies.com has a feature to add a fake time stream to get around this. 

    Let me know if you have any other questions. 

    1
    评论操作 固定链接
  • I tried the new beta application with one of my (UK) running club's standard routes. This is mostly off road. Some of the tracks are recognised paths which are on the Strava map, but a lot of the tracks and paths are not only off road, but also (as far as the Strava is concerned) 'off map'. I watched the route compute. The first red line looked great. But then the application tried to 'correct' the route for any part of the route that was 'off map'. The resulting final map was terrible! So: please just stop with the first red route, which is, I suppose, just the crude gps data. Job done. Alternatively, provide a choice of 'as is' or 'follow roads'.

     

    Are Strava worried, perhaps, that users could create and share routes that are not public rights of way? Surely a legal disclaimer to the effect that Strava cannot guarantee that routes use only public rights of way, or are rideable or runable  would do the trick, and allow you to produce 'as is' maps from the uncorrected gps data?

    1
    评论操作 固定链接
  • Hi,

    Creating a Strava route either from GPX import, or from an existing ride on Strava, should be a great feature, but there are a few significant issues:

    - Not following the Strava ride, or GPX file exactly - why does it change what is uploaded?  May not be such a problem for on-road, but off-road routes become very distorted.

    - Navigation screen should rotate to show the direction of travel facing forward (upwards), with your current location near the bottom - would make much easier to follow.

    - Ideally some kind of turn by turn navigation, but not as important as first two points.

     

    Many thanks

    1
    评论操作 固定链接
  • It seems to work fine with roads but dirt track it never keeps the same route when i import it ? 

    1
    评论操作 固定链接
  • "It seems to work fine with roads but dirt track..."; "The gpx to route generator (http://labs.strava.com/gpx-to-route) works spectacularly!"; "It worked well so I am looking forward to it being released."

    The platitudes are impressive. And very wrong. It does not work fine with roads. It does not work spectacularly or well. It may work fine if there are only a few roads where you live. However, here in NYC, it doesn't work properly at all. It never follows the GPX route submitted; but rather decides on its own streets. This, apparently, Strava considers to be a feature. In fact - it makes the route generator not-ready-for-prime-time. (And often unusable.)

    See the attached file showing a typical example that did not work. The 'red' lines are where Strava decided to change my route. These red lines include about 50% of the most important points of interest on this ride! As well, the long 'red line' in the lower right-hand corner, Strava has decided to take me off the relatively safety of the Glenwood Road, a very wide, single-lane backstreet. Instead, Strava feels its better for me to ride 26 blocks down Flatlands Avenue, which is essentially a four-lane speedway with no room for bicycles. (In NYC, this is akin to Strava putting you onto an interstate divided highway.) Why? I have no answers. (This is not the only place that Strava has moved me from a safer route, to a more dangerous one on this particular ride.) Why does Strava feel that its computer knows better where I should be riding, than me? OK - at least let me have my choice. Have a button that allows me to chose: A) My route exactly, -or- B) Strava's 'optimized' suicide routing.

    Also, Strava labs likes to call the results an 'editable route'. If I could use Strava to fix the incorrect route it generates; I would agree. However,Strava doesn't have a GPX editor, so I am not sure what they mean. The Strava application does not allow you to insert waypoints, or relocate existing ones (only delete them). Has anyone from Strava actually tried to use this? What is the status? When will you fix it?

    - Disappointed Strava Premium Member

    1
    评论操作 固定链接
  • Please allow it to work independent of if it matches the route builder. Unless you only run in a town this doesn't work. Very disappointing.

    1
    评论操作 固定链接
  • As I am currently switching from Garmin Edge to Wahoo Elemnt, I was also happy to find this gpx-to-route feature. I managed to download my Garmin Connect routes as .gpx files, but I also get the "error computing route" message. Can anyone figure if this might be a timestamp problem also?
    Would love to get these routes to Strava.

    1
    评论操作 固定链接
  • Is there any plans to turn this into a production feature ?

    Many of the rides here provide GPX/TCX files with route information -- I'm finding myself manually redrawing these or having to run multiple apps.

     

    1
    评论操作 固定链接
  • hi

    just joined for this feature did not know you did not have it

     

    will cancel subscription

    0
    评论操作 固定链接
  • Yes, I'm also surprised that this isn't handled: I want to create a route that retraes large portions of one done by someone else, and the easiest way of doing so is evidently going to be to edit a previously existing GPX file. Please add this functionality!

    0
    评论操作 固定链接
  • I was going to use Strava over some of the other apps.  Not having this feature - well it's turned me off.  I'll come back when it's possible

    0
    评论操作 固定链接
  • Strava, what is keeping you

     

    0
    评论操作 固定链接

帖子评论已关闭。

没有找到您要找的?

新建帖子