SRM PC8 and Strava

You can upload activities from your SRM PC8 to Strava using SRM's syncing software or directly from your WiFi-enabled device.

Uploading From PC8 Device Agent

  1. Plug the PC8 into your desktop with a USB cable.
  2. Open PC8 Device Agent.
  3. From the “Device” tab select the checkbox to the left of the activities you wish to upload. 
  4. Click "Upload X activities" in the bottom right corner.
  5. Click "Upload" when the popup appears.

English1.jpg

Uploading Directly From a PC8 Device

If you’ve enabled WiFi on your PC8, you can upload activities to Strava immediately after recording them or at any time from your history.

Uploading at the End of an Activity

  1. End the activity by short pressing PRO + SET.
  2. Press PRO (yes) when asked “Do you want to reset the current ride?”
  3. Press PRO (yes) again when asked “Do you want to upload the current ride?”

Uploading From Your Activity History

  1. Past activities can be found in the “History” screen which is accessed from the main menu.
  2. Select the activity you wish to upload.
  3. Press SET (select) until you see the option to upload.
  4. When an activity has been uploaded successfully, the upload symbol will appear next to the activity in the list.

    Engilsh2.jpg

Recording Tips

You’ll need to ensure GPS is enabled and we recommend setting the GPS sampling rate to one second.

  1. Plug the PC8 into your desktop with a USB cable.
  2. Open PC8 Device Agent.
  3. From the “Settings” tab, select “GPS”. 
  4. Select the checkbox next to “GPS Enabled” and select one second for the sampling rate.
  5. Unplug and reboot your PC8 for the settings to take effect.

English3.png

Was this article helpful?
5 out of 10 found this helpful

Comments

0 comments

Article is closed for comments.